How to Change LAN Mac Address for Windows

Fallow up post for uncapped SmartBro/MyBRO  this is a blogmytuts tutorial on How to Change LAN Mac Address for Windows. This is much easy  to do.
 
CHANGE MAC FOR LAN

Follow this image here

1.) Go to your LAN status



2.) after click configure
go to advance
click network addres
input new mac address in Value



  3.)wait po kayo ng 5min..para ma reconnect ulit sa internet.

  4.)open po kayo ng cmd(type nyo po "ipconfig /release" and "ipconfig /renew")

before..




after..





blogmytuts



The owner of blogmytut.blogspot.com will not be liable for any errors or omissions in this information nor for the availability of this information. The owner will not be liable for any losses, injuries, or damages from the display or use of this information.Report any Broken Download link on Blogmytuts Facebook Page
Share on Google Plus

About Jaime Lacson

A Freelance Computer Tech with knowledge about computer, router and mobile phones, especially in Upgrade and Downgrade OS, Software and Hardware troubleshooting. fallow me at Google+
    Blogger Comment
    Facebook Comment

15 comments:

  1. pano ko malalaman kung na uncapped na sha?

    ReplyDelete
  2. before changing speedtest 0.10-0.19mbps after changing same test sir

    ReplyDelete
  3. @knight ragna ginawa mo ba eto "ipconfig /release" and "ipconfig /renew"

    dapat mag reboot ng lan mo saka ka mag browse lilitaw yung smartbro portal tatanungin ka ng account number.. kung di failed ka

    ReplyDelete
  4. ganun nga ginawa ko release renew bago ako magbrowse. ok gawin ko trial and error nalng. tapos isa pang tanong so na ka direct yan. what if ilalagay ko sha sa wifi router. gagana parin ba? or need ko magconfig din ng router like sa isang tut mo sir?

    ReplyDelete
  5. ginawa ko yung release renew. tapos pumasok pa ako sa smartbro portal tas wala nangyari.

    ReplyDelete
  6. Followed all instructions Sir, incl the ipconfig and then re-entering account number and SRN, but in the end the speed is the same. :(

    ReplyDelete
  7. @knight ragna ok pag tumawag ulit ang may ari ng smartbro i checheck ko yan

    ReplyDelete
  8. Sir triny ko po. Lumitaw log in ng smart at sinunud ko po steps pero speed test ko bagal parin. bt ganun?

    ReplyDelete
  9. @Andy Vas try unplug smartbro power in 5minutes then do the change mac

    ReplyDelete
  10. Same here.. I followed the instructions properly pero in the end ganun pa din.. :(

    ReplyDelete
  11. Nothing Change .20 speed parin
    unplug smartbro power and do the change mac

    ReplyDelete
  12. @Jaime Lacson ginawa ko na lahat ganun parin hmmmm ano kaya ang problema. pumapasok sha sa smartbro portal pero ater malogin wala nang yayari sa speed ganun parin below 0.20mbps parin sha

    ReplyDelete
  13. Ang tuts dyan psukin mo ang canopy portal mo den punta ka sa QOS ^^

    ReplyDelete

Thank you for coming!! visit again for any updates orLike join this site and Drop some comment :P