Researchers Discover New Form Of Carbon That Can Make Diamonds At Room Temperature

Scientists from North Carolina State University have discovered a new phase of solid carbon, called Q-carbon, and it has some unusual properties: Q-carbon is ferromagnetic, harder than diamond, and glows when exposed to energy. These properties make it different from graphite and diamond, Graphite is one of the solid phases of carbon; diamond is another. (the other two possible forms of solid carbon, known as phases), and the researchers discovered that Q-carbon can be used to construct diamond structures at room temperature. 

To create Q-carbon, it's necessary to have two things: a source of carbon and a substrate, a material where the reaction can take place. The source is called amorphous carbon, where all the atoms are in a disorganized, irregular distribution. Coal is an example of amorphous carbon, while in this case the choice for the substrate was between sapphire, glass or plastic.

The substrate was coated in a layer of amorphous carbon, and was then hit with a single laser pulse for about 200 nanoseconds, heating it to 4,000 Kelvins (3,726 °C; 6,740 °F). The carbon was then rapidly cooled down, causing it to crystalize into Q-carbon.

Phases are distinct forms of the same material.

"We've now created a third solid phase of carbon," says Jay Narayan, the John C. Fan Distinguished Chair Professor of Materials Science and Engineering at NC State and lead author of three papers describing the work. "The only place it may be found in the natural world would be possibly in the core of some planets."

Q-carbon has some unusual characteristics. For one thing, it is ferromagnetic – which other solid forms of carbon are not.

"We didn't even think that was possible," Narayan says.

In addition, Q-carbon is harder than diamond, and glows when exposed to even low levels of energy.

"Q-carbon's strength and low work-function – its willingness to release electrons – make it very promising for developing new electronic display technologies," Narayan says.

But Q-carbon can also be used to create a variety of single-crystal diamond objects. To understand that, you have to understand the process for creating Q-carbon.

Researchers start with a substrate, such as sapphire, glass or a plastic polymer. The substrate is then coated with amorphous carbon – elemental carbon that, unlike graphite or diamond, does not have a regular, well-defined crystalline structure. The carbon is then hit with a single laser pulse lasting approximately 200 nanoseconds. During this pulse, the temperature of the carbon is raised to 4,000 Kelvin (or around 3,727 degrees Celsius) and then rapidly cooled. This operation takes place at one atmosphere – the same pressure as the surrounding air.

So far, Q-carbon has been produced in films between 20 to 500 nanometers thick. The researchers have a lot of control in the creation of Q-carbon, and by changing the substrate or the pulse length, they were able to create diamond nanostructures within the new material.

Shown is a scanning electron microscopy image of microdiamonds made with the new technique. NCSU

By using different substrates and changing the duration of the laser pulse, the researchers can also control how quickly the carbon cools. By changing the rate of cooling, they are able to create diamond structures within the Q-carbon.

"We can create diamond nanoneedles or microneedles, nanodots, or large-area diamond films, with applications for drug delivery, industrial processes and for creating high-temperature switches and power electronics," Narayan says. "These diamond objects have a single-crystalline structure, making them stronger than polycrystalline materials. And it is all done at room temperature and at ambient atmosphere – we're basically using a laser like the ones used for laser eye surgery. So, not only does this allow us to develop new applications, but the process itself is relatively inexpensive."

And, if researchers want to convert more of the Q-carbon to diamond, they can simply repeat the laser-pulse/cooling process.

If Q-carbon is harder than diamond, why would someone want to make diamond nanodots instead of Q-carbon ones? Because we still have a lot to learn about this new material.

"We can make Q-carbon films, and we're learning its properties, but we are still in the early stages of understanding how to manipulate it," Narayan says. "We know a lot about diamond, so we can make diamond nanodots. We don't yet know how to make Q-carbon nanodots or microneedles. That's something we're working on."

NC State has filed two provisional patents on the Q-carbon and diamond creation techniques.

The work is described in two papers, both of which were co-authored by NC State Ph.D. student Anagh Bhaumik. "Novel Phase of Carbon, Ferromagnetism and Conversion into Diamond" will be published online Nov. 30 in the Journal of Applied Physics. "Direct conversion of amorphous carbon into diamond at ambient pressures and temperatures in air" was published Oct. 7 in the journal APL Materials.

More information: "Novel Phase of Carbon, Ferromagnetism and Conversion into Diamond" Jagdish Narayan and Anagh Bhaumik, Published: Nov. 30, Journal of Applied Physics, DOI: 10.1063/1.4936595

Jagdish Narayan et al. Research Update: Direct conversion of amorphous carbon into diamond at ambient pressures and temperatures in air, APL Materials (2015). DOI: 10.1063/1.4932622

The owner of will not be liable for any errors or omissions in this information nor for the availability of this information. The owner will not be liable for any losses, injuries, or damages from the display or use of this information.Report any Broken Download linkon Blogmytuts Facebook Page. IF YOU WANT TO BORROW MY CONTENT PLEASE CONTACT US..
Share on Google Plus

About Jaime Lacson

A Freelance Computer Tech with knowledge about computer, router and mobile phones, especially in Upgrade and Downgrade OS, Software and Hardware troubleshooting. follow me at Google+
    Blogger Comment
    Facebook Comment